Santex Water Proof Wall Putty

Santax Water Proof Wall Putty is a white cement based putty which is manufactured by using some of the products which are being imported from other countries. Before packing, the raw-material and manufactured good is tested at every level.

METHOD OF APPLICATION:

• Prepare the surface by removing all the loosely adhesive material/dirt/old residual paints from the wall with emery paper, putty blade or wire brush.
• Then moisten the wall with sufficient quantity of clean water.
• Add approx. 400 ml. - 450 ml. clean water in 1 Kg. of putty.
• Mix with wooden peg/hand/trowel for 10- 15 minutes till a homogeneous paste is formed.
• Apply with putty knife/blade. Keep an interval of at least 4 hours between first and second coat.
• After 2nd coat giving an interval of atleast 24 hours, the surface should be rubbed with 320 number or more than that water proof emery paper & then gently with cotton cloth. The surface is now ready for painting.
• The total thickness of both the coats should be limited to 1.5 mm.

UNIQUE FEATURES:

• It does not require any primer coat.
• It consumes less amount of paint because it absorbs less paint.
• It reduce the ultimate cost of paint due to long life, No primer cost and low paint absorption.
• No scale formation when it comes in contact with water.

COVERING :

25-30 Sq. Ft./ Kg/mm