Beetish Acrylic wall Putty

(White Cement Based Putty)

Beetish Acrylic wall Putty is a white cement based putty which is manufactured by using some of the products which are being imported from other countries. Before packing, the raw-material and manufactured good is tested at every level.

APPLICATION PROCEDURE:

• Prepare the surface by removing all the loosely adhesive material/dirt/old residual paints for the wall with emery paper, putty blade or wire brush.
• Then moisten the wall with sufficient quantity of clean water.
• Add approx. 400 ml. - 450 ml. clean water in 1 Kg. of putty.
• Mix with wooden peg/hand/trowel for 10- 15 minutes till a homogeneous paste is formed.
• Apply with putty knife/blade. Keep an interval of at least 4 hours between first and second coat.
• After 2nd coat giving an interval of atleast 24 hours, the surface should be rubbed with 320 number or more than that water proof emery paper & then gently with cotton cloth. The surface is now ready for painting.
• The total thickness of both the coats should be limited to 1.5 mm.

COVERING:
25-30 Sq. Ft./ Kg/mm

BENEFITS :

Primer Coat	It does not require any primer coat.
Consumption of Paint	It consumes less amount of paint because it absorbs less paint.
Cost Reduction	It reduces the ultimate cost of paint due to long life, no primer cost and low paint absorption.
Water Resistance	It resists the dampness upto certain level.
Scale Formation	No scale formation when it comes in contact with water.
Consistency	It is consistent in quality as both the raw-materials and the manufactured goods are tested under strict ISO 9001:2000 quality norms.
Life of Paint	It increases the life of paint due to better binding properties.