Beetish Water Proof Wall Putty

Beetish Water Proof Wall Putty is a white cement based putty which is manufactured by using some of the products which are being imported from other countries. Before packing, the raw material and manufactured good is tested at every level.

METHOD OF APPLICATION:

• Prepare the surface by removing all the loosely adhesive material/dirt/old residual paints from the wall with emery paper, putty blade or wire brush.
• Then moisten the wall with sufficient quantity of clean water.
• Add approx. 400 ml. - 450 ml. clean water in 1 Kg. of putty.
• Mix with wooden peg/hand/trowel for 10- 15 minutes till a homogeneous paste is formed.
• Apply with putty knife/blade. Keep an interval of at least 4 hours between first and second coat.
• Similarly apply second coat as before the next day.
• After 2nd coat giving an interval of atleast 24 hours, the surface should be rubbed with 320 number or more than that water proof emery paper & then gently with cotton cloth. The surface is now ready for painting.
• The total thickness of both the coats should be limited to 1.5 mm.

UNIQUE FEATURES:

• It does not require any primer coat.
• It consumes less amount of paint because it absorbs less paint.
• It reduce the ultimate cost of paint due to long life, No primer cost and low paint absorption.
• No scale formation when it comes in contact with water.
• Make Your Building Water Proof for every weather.

COVERING :

25-30 Sq. Ft./ Kg/mm